KNF N 0150, Инструкция по эксплуатации и установке

Страница: 9 / 80

Diaphragm Pump N0150.12 Safety
Translation of Original operating and installation instruction, English, KNF 308922-308925 02/22 9
§
Fuels
§
Explosives and flammable materials
§
Fibers
§
Oxidizing agents
§
Foodstuffs.
The pumps must not be used for simultaneous generation of a vacuum
and positive pressure.
This function can be made possible on a project basis following consulta-
tion with KNF Customer Service.
No overpressure may be applied to the suction side of the pump.
This function can be made possible on a project basis following consulta-
tion with KNF Customer Service.
Pumps with capacitor motor are not intended for operation with a fre-
quency converter.
2.7 Directives and standards
EU/EC
Directives
EU conformity assessment
The pump complies with the requirements of the following directives:
§
Directive 2009/125/EC for establishing a framework for the setting of
eco-design requirements for energy-related products and ordinance
(EU) 2019/1781 for the setting of eco-design requirements for electric
motors and speed controls in accordance with Directive 2009/125/EC
of the European Parliament and of the Council.
Standards The following harmonized standards apply:
§
EN 61000-6-1/2/3/4
§
EN 60034-1
§
EN 60034-30-1 (only pumps with three-phase motor)
EU/EC
Directives
Declaration of incorporation – for partly completed machinery
With respect to the Machinery Directive 2006/42/EC, the drives are partly
completed machinery and are, therefore, to be regarded as not ready for
use. Partly completed machinery may not be commissioned until it has
been determined that the machine into which the partly completed machin-
ery is to be installed complies with the provisions of the Machinery Direc-
tive 2006/42/EC. The following fundamental requirements of Annex I of Di-
rective 2006/42/EC (general principles) are applied and observed:
§
General principles no. 1
§
No. 1.1.2. / 1.1.3. / 1.3.1. / 1.3.3. / 1.3.4. / 1.4.1. / 1.5.1. / 1.5.2. /
1.5.8. / 1.5.9. / 1.7.4. / 1.7.4.1. / 1.7.4.3.
Standards The following harmonized standards apply:
§
EN 61000-6-1/2/3/4
§
EN 60034-1
§
EN 60034-30-1 (only pumps with three-phase motor)
§
EN 60204-1