Integrating into PurityChrom®
9
Airsensor Supplement, V6879
Continuing the Run
To continue the run after air has been detected, you can activate the set-
ting in the register Functions of the Time Control Editor. Start writing
your method as usual and activate the function Wait for Input Signal at a
particular time during the method.
NOTE
Make sure that the functions succeeding the function
Wait for Input Signal start with a delay of 0.01 s.
NOTE
Do not activate the option Stop Pumps at Time Control
Hold in the register Options. Otherwise the pump stops
after the function Wait for Input Signal has been
reached.
NOTE
You have to choose the Gameport Input 1, 2, 3, or 4
which equals the airsensor number.
