Installation Instructions (continued)
Adjustable Glass Shelf Kit
0132-524-GL2
Caution:
- Do not overtighten screws as they
may cause stripping and result in
loss of shelf integrity
Figure 3
Installation:
Step 7:
Place each finial in the top and bottom ends of each standard
Figure 3
.
NOTE:
If the finials don’t fit loosen the screws, insert the finials, and re-tighten
the screws.
Step 8:
Attach shelf clamps by inserting them into the slots located on the left side of
the standards at the desired heights
Figure 4
. Tap shelf clamp down to lock in place.
NOTE:
Each shelf clamp must be level with the shelf clamp directly across from it
on the other standard.
Step 9:
Attach the shelves by placing them into the shelf clamp. Once in the correct
position use a screwdriver to tighten the clamps
Figure 5
.
Figure 4
Figure 5
Tighten clamp
to secure shelf
2700 Oak Industrial Dr. NE
Grand Rapids, MI 49505
800-253-1561
www.kv.com
©2015 Knape & Vogt. KV and the KV logo are trademarks of Knape & Vogt. 310454/0715
