KMS MD35, Руководство пользователя

Страница: 57 / 75

KMS MD35 manual
Version 4.16 57
3.2.4.5 Change user access level
Determines security level and access restriction by setting a password.

Motor + system diagnostics visible: This menu is displayed

Motor + system diagnostics resettable: Reset from menu possible.
 ECU settings read only: Settings are displayed but not adjustable
 Display dashboard only: Only the communication bar is displayed (no maps)

No access to ECU: No access to ECU
The standard password in the system can be changed to a password you like.
To save the changes made „click Send tot ECU‟
3.2.4.6 CAN settings
The CAN settings can be used for two purposes. Users can
check whether the CANbus works properly by pressing on
„search for devices‟. The ECU will search for all devices
connected to the CANbus and display them under
„current configuration‟. This way users can check
whether all devices connected to the CANbus really
communicate with the ECU. If a connected device (or
multiple devices) are not found, please check the CANbus
for correct connection and power supply.
When more than one UEGO CAN controller is connected
to the CANbus, the lambda controllers have to be
designated to a function; lambda 1 to lambda 16.
Lambda 1 has the highest priority and will be selected first for the lambda control. Lambda 2 has
the second highest priority and will be selected as the second lambda controller, etc.
For example when you have connected four UEGO CAN controllers on each cylinder of a 4-cylinder
engine, users can set the UEGO CAN controller on cylinder 1 as lambda 1, etc. When a KMS CAN
display has been connected, you can display the lambda of all 4 cylinders in accordance to the
cylinder number.
Designating the function to the UEGO CAN controllers can be done by selecting the particular UEGO
CAN controller (note the serial numbers) under „Device‟, and then select its „function‟ (lambda 1 to
16). Select „send to device‟ to designate the function to the controller.