BAC-19xxxx FlexStat
Installation Guide
KMC Controls, 19476 Industrial Drive, New Paris, IN 46553
/
877.444.5622
/
Fax: 574.831.5252
/
CONTENTS
Quick Start ............................................... 1
Wiring Considerations................................. 2
Mounting .................................................. 2
Network Connections ................................. 4
Connect (Optional) Ethernet Network.......... 4
Connect (Optional) MS/TP Network ............ 4
Sensor and Equipment Connections .............. 5
Power Connection ...................................... 6
MS/TP Network Access Port ........................ 7
Maintenance ............................................. 7
Additional Resources .................................. 8
Important Notices ...................................... 8
CAUTION
The BAC-19xxxx models are
NOT compatible with the
backplates of older BAC-
10xxx/12xxxx/13xxxx/14xxxx
FlexStats! If replacing an older
FlexStat, replace the backplate as
well.
NOTICE
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE DEVICES
KMC
Conquest
TM
Automation Hardware
QUICK START
Complete the following steps to select and install
a KMC Conquest BAC-19xxxx FlexStat:
1. Select the appropriate model
for the intended
application and options (see the
).
2.
Mount and wire the unit
(see this document
BAC-19xxxx FlexStat Sequence of
).
3.
Configure and operate
the unit (see this docu-
4. If necessary,
troubleshoot
any issues (see the
BAC-19xxxx FlexStat Application Guide
).
NOTE:
This document gives basic mounting,
wiring, and setup information. For
additional information, see the KMC
Controls web site for the latest
documents.
