1
General Description
The portable power analyser SMY-CA is specially designed for monitoring of energy and power quality in
advanced power systems and smart grids. It uses standard USB port for local configuration and data acquisition
and also Ethernet for communication with remote control systems.
It is equipped with three voltage inputs and three current inputs for current sensors with X/333mV outputs.
Warning !
The X/333 mV, options is specially designed to be used only in combination with provided
external current sensors which are supported with the respective option.
SMY-CA is based on SMY 133 panel power meter and shares most of its features.
Basic set of SMY-CA contains following
SMY-CA
power analyser
4 wire voltage probe
SMY-CU3
with built-in fuses
4 pcs of croco-clips XKK-1001
5m UTP ethernet cable
ETH5m
with IP65 rated screw type connector from one side
multifunctional panel meter
SMY 133
multifunctional panel meter
ETH5m
SMY-CA
XKK-1001
SMY-CU3
Figure 1
There are also range of different optional current sensors available (see. Table 1)
1
