background image

Page 5 of 11 

 

 

Keep children and bystanders away from the work area while operating the tool. Do not allow 

children to handle the product.  

 

WARNING

 

PERSONAL SAFETY 

 

Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use 

the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of 

inattention while operating the tool may result in serious personal injury. 

 

Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing 

and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving 

parts. Air vents on the tool often cover moving parts and should be avoided. 

 

Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant safety 

goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust mask in 

dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection systems, 

and hearing protection when appropriate. This applies to all persons in the work area.  

 

Do not overreach. Keep proper footing and balance at all times.

 

 

CAUTION

 

PRODUCT USE AND CARE 

 

Do not force the product. Products are safer and do a better job when used in the manner for 

which they are designed. Plan your work, and use the correct product for the job. 

 

Check for damaged parts before each use. Carefully check that the product will operate properly 

and perform its intended function. Replace damaged or worn parts immediately. Never operate the 

product with a damaged part. 

 

Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with 

the power switch is dangerous and must be repaired by an authorized service representative 

before using. 

 

Disconnect the power/air supply from the product and place the switch in the locked or off position 

before making any adjustments, changing accessories, or storing the tool. Such preventive safety 

measures reduce the risk of starting the tool accidentally. 

 

Store the product when it is not in use. Store it in a dry, secure place out of the reach of children. 

Inspect the tool for good working condition prior to storage and before re-use. 

 

Use only accessories that are recommended by the manufacturer for use with your product. 

Accessories that may be suitable for one product may create a risk of injury when used with 

another tool. Never use an accessory that has a lower operating speed or operating pressure than 

the tool itself. 

 

Do not leave the tool running unattended. 

Содержание 52509












Отзывы: