background image

Page 

31

 of 

32

 

 

Replacement Parts 

 

For replacement parts and technical questions, please call Customer Service at 

1-800-222-5381

 

Not all product components are available for replacement. The illustrations provided are a convenient 
reference to the location and position of parts in the assembly sequence.  

 

When ordering parts, the following will be required: model number, serial number/lot date code, and 
description.  

 

The distributor reserves the rights to make design changes and or improvements to product lines and 
manuals without notice.  

Limited Warranty 

Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or 
“Your”) that the Klutch product purchased will be free from material defects in both materials and 
workmanship, normal wear and tear excepted, for a period of 

one year

 from date of purchase.  The 

foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product 
instructions. There are no other warranties, express or implied, including the warranty of merchantability or 
fitness for a particular purpose. If the product does not comply with this limited warranty, Your sole and 
exclusive remedy is that We will, at our sole option and within a commercially reasonable time, either replace 
the product or product component without charge to You or refund the purchase price (less shipping). This 
limited warranty is not transferable. 
 

Limitations on the Warranty 

This limited warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect, misuse, 
or as a result of any accident or in any other manner; (c) damage from misapplication, overloading, or 
improper installation; (d) improper maintenance and repair; and (e) product alteration in any manner by 
anyone other than Us, with the sole exception of alterations made pursuant to product instructions and in a 
workmanlike manner. 
 

Obligations of Purchaser  

You must retain Your product purchase receipt to verify date of purchase and that You are the original 
purchaser. To make a warranty claim, contact Us at 1-800-222-5381, identify the product by make and 
model number, and follow the claim instructions that will be provided. The product and the purchase receipt 
must be provided to Us in order to process Your warranty claim. Any returned product that is replaced or 
refunded by Us becomes our property. You will be responsible for return shipping costs or costs related to 
Your return visit to a retail store. 
 

Remedy Limits 

Product replacement or a refund of the purchase price is Your sole remedy under this limited warranty or any 
other warranty related to the product. We shall not be liable for: service or labor charges or damage to Your 
property incurred in removing or replacing the product; any damages, including, without limitation, damages 
to tangible personal property or personal injury, related to Your improper use, installation, or maintenance of 
the product or product component; or any indirect, incidental or consequential damages of any kind for any 
reason. 
 

Assumption of Risk 

You acknowledge and agree that any use of the product for any purpose other than the specified use(s) 
stated in the product instructions is at Your own risk. 
 

Governing Law 

This limited warranty gives You specific legal rights, and You also may have other rights which vary from 
state to state. Some states do not allow limitations or exclusions on implied warranties or incidental or 
consequential damages, so the above limitations may not apply to You. This limited warranty is governed by 
the laws of the State of Minnesota, without regard to rules pertaining to conflicts of law. The state courts 
located in Dakota County, Minnesota shall have exclusive jurisdiction for any disputes relating to this 
warranty. 

 

Содержание 49671

































Отзывы: