www.kluizen.nl
+ 31 (0) 180 555 200
6
START
STOP
Connect the power supply. In order to ensure safety, the earth wire must be
earthed effectively.
Turn on the power switch, the machine will enter a state of warm-up and self-test.
This state takes about 10 seconds. The time that needs waiting for will be showed on the
display. After self-test, if there is no error, the interface will appear two cases:
(1)
If the ID function is not opened, the interface will be shown below:
Then, press
to count coins directly, or press
SET
to enter the “MENU” and open
the ID function according to
“ID Function” on page 13
.
(2)
If the ID function is opened, the interface will be shown below:
Then, select the required ID number according to
“ID Function” on page 13
. After
completing setup, press
to return to the main interface.
If the machine don’t pass the self-test, the interface will display the fault code.
Please eliminate trouble in accordance with
“
ERROR 01” on page 19.
Operation
