www.kluizen.nl
+ 31 (0) 180 555 200
10
Check Count Information Details
6)
Press
or
to select the desired denomination. Then Press
to
count coins. When the machine counts a preset number of coins, it stops. Then the interface
displays prompt. For example, select BAG mode and set the preset number of 0.5 denomination
to 500.
“0.50 STOPP OK”
represents that the number of 0.50 denomination has reached its preset
number. Replace or empty corresponding bag. Then press
to continue count coins.
The situations that may occur while the machine is counting coins are described as follows:
★
Sometimes, some actual coins are mistaken for rejected coins because of a big change
of characteristic parameters that cause by excessive wear and so on. At the moment,
please count the coins in the Reject Drawer again. The machine will accurately identify
actual coins.
★
Sometimes, Feed Hopper will be blocked by too many coins piling up. At this time,
please wait for moment patiently. If the Alloy Sensor doesn’t detect coins in 2 seconds,
the program will send instruction to make the Feed Disc reverse. After coins running
normally, the Feed Disc will back to forward rotation.
After completing counting, the machine stops. At the moment, press
number and the amount of each denomination.
Displayed symbols and their meaning is indicated in the following table :
to check the
Symbols
Meaning
COIN
Represent each denomination.
Symbols
Meaning
DETAIL