KLUBB K38P, Руководство пользователя

Страница: 45 / 64

45
F. Hydraulic oils / filters
The elevator is supplied with hydraulic oil (TITAN FUCH H32 oil). This oil is made for use in
"temperate climates” and provides good service at regular temperatures. H46 oil is also suitable
but its compulsory to use an HV type oil
The oil filter must be changed after the first 30 days of use and then after 1 year or 500h of use
(whichever comes first) depending on how often the elevators is used.
Pump cavitation denoted by noisy operation is due to a clogged filter, a low oil level or weather
conditions there are too cold for the type of oil being used.
To change the oil filter, unscrew the filter block and replace it with a new one, carefully and slightly
oiling the gasket.
G. Greasing
 Slew ring
The slew ring is supplied correctly lubricated.
- Greece to be used: VANGUARD SILEX PLS/3
- Operating temperature: -35/+130°C
Compliant greases:
- TOTAL CALORIS M/3
- FINA BENTEX 5M
- SHELL RETINAX HDX
- MOBIL MOBILGREASE SPECIAL
- FUCHS RENOLIT FLM/2
- BP GREASE LTX/2M
- AGIP GREASE SM/2
- CASTROL MOLY GREASE/2
Lubricating frequency:
Machine conditions of use Greasing intervals (1
st
completed term)
Clean and dry environment, mild climate.
Every 300h of use
Or every 6 months
Dirty, dusty or sandy environment, coastal
locations. Every 200h of use
Or every 4 months
Extreme conditions
Every 70h of use
Or every 2 months
Note: The slew gear consists of 4 greasers: 3 along the hydraulic motor/worm screw assembly
and one 45° angle greaser inside the fixed ring near the turret tube in the column. The latter is
more critical and increasing recommendations must be complied with to the letter.
 Shafts
All the shafts of the machine are mounted on self-lubricating bearings and therefore do not require
lubrication.
www. duma -rent.com