KLUBB K38P, Руководство пользователя

Страница: 10 / 64

10
G. Planned and unplanned uses

Planned uses
The MEPP consists of a carrier vehicle and the elevator which is an integral part of this machine.
It is designed for lifting people and tools according to indications; the maximum planned work
cycle of the MEPP is 100,000 cycles. According to the EN 280 standard, the 100,000 work cycles,
if executed on a regular basis for 10 years, should correspond to the following: use of machine
for 50 weeks/year, 40 hours per week, 5 cycles per hour.
The machine must be used by suitably trained personnel to guarantee absolute safety and avoid
any risks to third parties.
 Unplanned uses
Any different use, not explicitly covered in paragraph II.L.1: Planned use

Cases where the manufacturer cannot be held liable
The Manufacturer is not liable in any of the following cases:
•
Uses not provided for in this manual.
•
Improper use of the machine or use by non-qualified persons.
•
Uses not complying with standards.
•
Lack of scheduled servicing.
•
Unauthorized changes or operations.
•
Removal of seals.
•
Use of non-original spare parts.
•
Failure to comply partly or fully with the instructions.
•
Failure to fill in or sign the service sheet (See chapter XI. Inspection register).
 Load limiter
In standard form, our lifts are not equipped with load limiters, They correspond to the real for
stability criteria of standard EN 280. I.e., stability tests with 150% of the nominal load (static) and
110% of the nominal load (dynamic) with a smaller size bucket.
www. duma -rent.com