KLS Martin independant Fix Bridge, Инструкция по эксплуатации

Страница: 7 / 24

independant Fix
Instructions for Use
Revision 01 7
Risk of injury due to electrical shock!
Before connecting UDA to the main power supply, pay attention to tension and frequency displayed on
label.
•
Uda must be protected by circuit braker differential switch.
Risk of injury due to electrical shock!
To avoid electric shock danger, UDA must be wired with grounded connection.
Risk of injury due to electrical shock!
About UDA’s connection, regardless any kind or combinations of devices, please don’t exceed the
electrical power UDA was made for, which can be found on the labels applied on the plate. Please don’t
connect adapters between the device’s electrical sockets and plugs.
Risk of injury due to system parts falling down!
•
Please don’t overload UDA’s max load, listed on the related label.
Risk of injury due to unauthorized use!
UDA must not be tempered with or used differently from the intended use.
Risk of injury due to unauthorized maintenance work!
The user is not allowed to replace UDA’s components. This operation must be done by authorized
personnel only.
•
In order to replace worn-out parts, please follow the maintenance instructions carefully.
Damaged UDA removal must be done by authorized personnel only.
• Before removing the UDA, remove the power supply using the protection switch on the general panel
and ask qualified personnel to replace the UDA.