- 09-
Step 2.
Attach the mat to the frame.
Select a start point (marked as point “ZERO”) on the frame, then attach the spring
(E) to a V-ring of the mat with the spring loading tool (T1).
Note:
There are 72 V-rings sewn on the mat and 72 corresponding holes on the
frame. Do not install the springs in turn, or it will get harder to attach the remaining
springs, even unable to attach them in the end.
Spring
Loading Tool
Frame
V-ring
Spring
Mat
1
3
2
1. First, attach the springs to the start
point ZERO and the 18th hole, and then to
the 36th and the 54th holes.
2. Secondly, attach the springs to the 9th
and the 27th holes, and then to the 45th
and the 63rd holes.
3. Thirdly, attach a spring every 3 holes.
4. Finally, install the remaining springs.
