Remote control
In addition to the top panel keys, a convenient control is included which provides additional functions to allow
greater control over the media player.
Components and media
panel buttons
Description
6.5-inch low-frequency driver
3-inch full-range drivers
Displays the input mode selected, the volume level, the track being played and
the channel frequency
Insert a compatible storage device to play music files
Insert a compatible storage device to play music files
Press this button to change the device from standby to active mode, and vice
versa in all the modes
Press and hold this button to turn off the unit
Press this button to lower the volume level of the speaker
Press this button to increase the volume level of the speaker
Press this button briefly to toggle among the available input modes: auxiliary,
DVD, USB, SD
TM
; tuner and
Bluetooth
®
.
In USB, SD
TM
or
Bluetooth
®
mode, press this button to select the previous track
on your play list
Press and hold this button to scan channels in a downward direction
This feature is not available in auxiliary mode
In USB, SD
TM
or
Bluetooth
®
mode, press this button to select the next track on
your play list
Press and hold this button to scan channels in an upward direction
This feature is not available in auxiliary mode
Picks up signals for the tuner
Enables audio playback from devices fitted with a 3.5mm connector, such as
computers, TV sets, MP3, DVD players, etc
Insert the AC plug into a wall outlet
14.
Power cord
13.
AUX
and
DVD
inputs
12.
Antenna
10. /
TUN -
6.
Power button
7.
VOL -
8.
VOL +
9.
Source
4.
SD
TM
card slot
5.
USB port
3.
LCD display
2.
Satellites
1.
Subwoofer
11. /
TUN +
Buttons
Description
It replicates the function of the
Standby
button on the front panel
Cancels the audio coming from the speaker. Press it again to unmute the speaker
Press this button to cycle through the available audio inputs. As there is no default
mode assigned, the speaker will automatically start streaming audio based on the
last source used before the unit was turned off
Briefly press this button to cycle through the six different lighting patterns, and also
to disable this feature
This button controls the high (treble) or low (bass) frequencies.
Note:
To control the bass level from 00 to 30 and treble level from -6 to +6 press
and hold the volume button on the speaker panel. These can also be controlled
from the remote control by pressing or volume -
In tuner mode, press and hold this button to start the automatic search and storage
of channels found in the band with a strong broadcast signal
Press these buttons to decrease or increase the frequency in steps of 0.1MHz
Press and hold to scan downwards or upwards, and tune the previous or next
available channel automatically
Press these buttons to increase or decrease the output volume of the speaker
In USB, SD
TM
or
Bluetooth
®
mode, briefly press this button to
start and pause media
In
Bluetooth
®
mode, press and hold this button for several seconds in order to put
the speaker back into pairing mode
In USB, SD
TM
or
Bluetooth
®
mode, press any of these buttons to select the previous
or next track on your play list
In tuner mode, it will scan downwards or upwards to the next memorized channel
Press any key from 0 to 9 on the remote control to choose directly the tracks you
want to play. In tuner mode, it allows the manual input of frequencies or the
selection of any of the previously stored channels
11. Numbered keypad
10. /
9.
6.
MEMORY
2.
MUTE
button
3.
Source
5.
TONE
4.
LED
1.
Power
button
7.
TUNING / TUNING
8.
VOL / VOL
1. Install the supplied batteries in the remote control following the correct polarity as indicated inside
the compartment.
2. In order for the remote to operate properly, ensure that it is pointed toward the front of the speaker.
1
2
3
4
5
6
7
8
0
9
SOURCE
TONE
TUNING-
MEMORY
LED
1
3
5
7
2
4
6
9
10
8
11
Содержание Rubic KWS-711
Страница 1: ...KWS 711 Rubic...