KlipXtreme KPM-300, Руководство пользователя

Страница: 5 / 7

Then, connect the grommet base tab to the groove on the shaft edge. Place the shaft and
grommet base assembly on top of the cable opening, making sure the bolt hole is aligned
right at the center.
From underneath the work surface, pass the bolt with the flat clamping plate and thread it
into the vertical assembly (shaft) 4.
5
Fully tighten the locking knob until it is securely mounted to your desk surface. 6.
6. Final desktop assembly
Once you have completed the installation steps describe above, insert the cable clip on the
shaft.
Slide the mounting arm onto the shaft and tighten the screw at the desired height. 1.
2.
Now carefully slide the monitor with the plate attached into the matching end of the
mounting arm. Fasten the monitor to the arm with the thumb screw provided. 3.
Route the monitor and power cables through clips as shown. 4.
Locking knob