The clamp provides two positions depending on the thickness of your desk. For thinner
surfaces, unfasten the two screws and move the base plate upwards to the next hole
position. Tighten the screws when done.
1.
Option A
- C-clamp mount
Pull apart the C-clamp base by loosening the two screws with the allen wrench.
Next, with a phillips screwdriver, separate the curved clamping plate from the threaded bolt
by holding steady the locking knob.
See figures 1 and 2.
1.
2.
Attach the supplied flat clamping plate to the threaded bolt, and then fix the five rubber
pads beneath the grommet base also included in the kit.
3.
Option B
- Grommet mount
Proceed to attach the shaft to the C-clamp using the supplied screws, as illustrated below.
2.
Tighten the screws firmly using the allen wrench, and then fix the five rubber pads under-
neath the top plate.
Slide the clamp base onto the edge of your desktop in your desired location. Tighten the
locking knob until the shaft is securely mounted to your desk surface.
3.
4.
Locking knob
C clamp
Curved plate
Figure 1
Figure 2
Threaded bolt
Figure 1
Figure 2
Содержание KPM-300
Страница 7: ...Notes...
