CAUTION:
Verify the adequate thread engagement of the screw/spacer combination on
your monitor. Too short will not hold the display and too long will damage it.
Attach the plate to the monitor by aligning the mounting holes in the VESA plate with the
corresponding threaded inserts of the display.
3.
If your monitor has an irregular back or recessed mounting points, spacers must be placed
between the plate and the display, to compensate the difference in depth.
4.
Use a phillips-head screwdriver to fasten the VESA plate to the display. Be careful not to
over-tighten the screws.
5.
Too short
Correct
Too long
Monitor with a flush installation surface
Monitor with a recessed installation surface
5. Desktop installation
The monitor arm allows two installation configurations.
It can be clamped to a desk or table, or mounted through a grommet hole. Instructions for
both will be provided in the following sections.
First, decide where you prefer to place your monitor. Prior to attaching the shaft to your
desk, make sure you have enough room to fit the entire assembly either behind or in the
cable hole area of your desk, depending on the mounting method you choose.
•
•
Notes:
Содержание KPM-300
Страница 7: ...Notes...
