KlipXtreme KNH-500, Руководство пользователя

Страница: 5 / 17

8. If pairing is successful, a voice prompt will be heard and the LED will slowly flash
blue. If after 60 seconds the pairing process fails, please repeat steps 1 through 7
described above.
9. You only need to pair the headphone with your phone once, as it will
re-connect with memorized devices automatically.
Using the wireless headphones
1. Answering and ending a call
• When there is an incoming call, you will hear a ring and the LED blinks
alternatively red and blue.
• Briefly press the
Multifunction
button to pick it up. You may also press the
answer button on your cellular phone to take the call.
• To end a call, simply press the
Multifunction
button once again. Likewise, you
may also finish the call directly using the end key on your cell phone.
• To reject or ignore an incoming call, press and hold the
Multifunction
button
for 1 to 3 seconds.
• If you want to redial the last number called, quickly press the
Multifunction
button twice.
2. Music playback
• Briefly press the
Multifunction
button to reproduce and stop audio playback.
• Press and hold the and buttons to go to the
Next
or
Previous
track.
• Press briefly the and buttons to increase or decrease the audio level on
the headphones.
• The prompt will be heard at about 5-minute intervals when the battery charge
is at 20%.
• The prompt will warn “Battery 10%, please charge” once, and then the device
automatically shuts off.
IV. Advanced operation
Note:
Before installing this product, please make sure your computer or laptop is
Bluetooth
® compatible.
Pairing the headphones with your mobile device
1. Press and hold the power switch on the headphones to turn on the device.
2. Next, set your
Bluetooth
®
mobile device to “discover” the wireless headphones.
3. Place the headphones and your phone not more than one meter away from
each other.
4. The LED blinks alternatively red and blue to indicate that the headphone has
entered into the pairing mode and that it is ready to be detectable for the
first time.
5. On your mobile phone, tap the newly discovered audio device (
KNH-500
)
being displayed in the
Bluetooth ®
list.
6. When the mobile device asks if you want to pair with it, click
Yes
or
OK
to accept.
7. If you have a lower
Bluetooth
®
version, you may be prompted to enter the
passkey
0000
(4 zeros).
• When listening to music using your mobile phone, playback will pause to allow
the call to go through.
• As soon as you hang up, music playback will resume automatically.
Headphone
MPN KNH-500
Technical specifications
Type
Form factor
ANC reduction
Driver unit
Maximum power output
Frequency
Impedance
Sensitivity
Color
Microphone
Form factor
Directivity
Frequency
Impedance
Sensitivity
Connectivity
Connection type
Wireless RF frequency
Bluetooth profiles
Wireless range
Active noise-cancelling headphones
Over the ear
Up to 20dB
Ф40mm
20mW
20Hz-20,000Hz
32Ω ± 15%
105 ± 3dB/mW (S.P.L at 1kHz)
Charcoal
Built-in
Omnidirectional
20Hz-10,000Hz
32Ω
105dB at 1kHz
Wireless and 3.5mm
2.4GHz
A2DP, AVRCP, HFP, HSP
33ft