Data ultimo aggiornamento: 06/09/2019
Pag. 12 di 33
SWITCHING ON AND HANDLING THE MACHINE
INSTRUCTIONS FOR SWITCHING ON AND HANDLING THE MACHINE
CAUTION
Make sure that the safety instructions indicated above have been
complied with before activating the machine.
INSTRUCTIONS FOR CORRECT CONNECTION TO THE MAINS
ATTENTION
To SAFELY perform the connection to the mains, carry out the
following operations
PRECISELY
:
6. The machine must be at a standstill and the wheels locked by pressing
their locking lever; [
Picture 2];
7. Connect the power cable to the mains;
8. Turn the selector A [
Picture 1-A] to position 1 to feed the cardboard from
the inlet to the outlet (working phase) and to position 2 for the opposite
direction.
9. Switch on the machine by pressing the green button B on the electric panel
[
Picture 1-B].
10. To stop the machine, press the red button C [
Picture 1-C].
The machine is now ready to work.
Foto 1/ Picture 1
Foto 2/ Picture 2
MACHINE OPERATING INSTRUCTIONS
Foto 3/ Picture 3
Foto 4/ Picture 4
PLEASE NOTE :
The machine can process cardboard of a maximum thickness equal to the width of the inlet.
1. Activate the machine by turning the Black selector ;
2. Insert the cardboard into the machine’s inlet ;
3. Recover the processed material from the side opposite the inlet.
N.B. If the cardboard jams, turn the black selector in the opposite direction.
MAINTENANCE INSTRUCTIONS
WARNING:
Before carrying out the following operations, unplug
the machine.
CLEANING THE MACHINE:
To perform routine cleaning of the
machine, remove the protection at the top. Collect the cardboard
waste inside the machine using an industrial vacuum cleaner.
