Klimawent
– the warranty of highest quality at attractive price
2 of 15
Roof fans SMART-SN
18.06.2020
INTRODUCTION
This user manual is intended for the user of the
SMART-SN
device. Its purpose is to provide the user with
instructions on the use, assembly, commissioning and operation of the device.
Carefully read this manual before installing the device at the workplace and using it.
Due to the continuous improvement of its products, the manufacturer reserves the right to
introduce construction changes to increase the utility values and safety of use.
The design of the
SMART-SN
device takes into account the current state of knowledge and technology level
and is in accordance with normative principles and regulations, and above all with the principles of safety and
health protection set out in the following legal acts:
Directive 2006/42/EC
of the European Parliament and of the Council of 17 May 2006 on machinery, and
amending Directive 95/16/EC (recast) (Official Journal L 157 of 09.06.2006, page 24)
Directive 2014/35/EU
of the European Parliament and of the Council of 26 February 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of electrical
equipment designed for use within certain voltage limits (recast) (Official Journal L 96 of 29.03.2014, page
357)
Directive 2009/125/EC
of the European Parliament and of the Council of 21 October 2009 establishing a
framework for the setting of ecodesign requirements for energy-related products (recast) (Official Journal L
285 of 31.10.2009, page 10)
Commission Regulation (EU) No 327/2011 of 30 March 2011
implementing Directive 2009/125/EC of the
European Parliament and of the Council with regard to ecodesign requirements for fans driven by motors
with an electric input power between 125 W and 500 kW (Text with EEA relevance) (Official Journal L 90 of
6.4.2011, page 8)
Regulation of the Polish Minister of Economy of 21 October 2008
on requirements for machines (Journal
of Laws No. 199 of 2008, item 1228)
Also meets the requirements of the following harmonised standards:
PN-EN ISO-12100:2012
Safety of machinery – General principles for design – Risk assessment and risk
reduction
PN-EN 60204-1:2018-12P
Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
PN-EN 60034-1:2011
Rotating electrical machines – Part 1: Rating and performance
PN-EN ISO 5802:2008/A1:2015-07E
Industrial fans – Performance testing in situ – Amendment 1
PN-EN ISO-13857:2020-03
Safety of machinery – Safety distances to prevent hazard zones being reached
by upper and lower limbs
PN-EN 60529:2003/A2:2014-07
Degrees of protection provided by enclosures (IP Code)
APPLICATION
Roof fans
SMART-SN
are intended for general ventilation of rooms of general and industrial construction. They
can also be used in technological (workplace) ventilation systems. Due to the available static pressure, they can
be included in the ventilation duct network.
SMART-SN fans can be used for forcing dry air with dustiness NOT greater than 0.3 g/m3 and
maximum tempe60°C, without sticky, corrosive or explosive pollution!
MANUFACTURER'S DISCLAIMER
General disclaimers
The manufacturer is not liable for damages resulting from the incorrect connection of the power supply
and improper use of the device.
It is unacceptable to install any additional elements not included in the device or equipment on the
device.
Unauthorized alterations and modifications to the device are not allowed.
The device should be operated and repaired by an authorized and trained person.
Protect all machine components against mechanical damage.
The manufacturer is not responsible for bodily injury resulting from incorrect use.
Before installing the device, check the load capacity of the structural components to which it will be
attached. Incorrect, careless or unstable mounting of the device may damage it, and also pose a real
threat to people nearby.