Klimawent
– the warranty of highest quality at attractive price
14 of 15
Roof fans SMART-SN
18.06.2020
The fan can be restarted after the checking procedure described in section 6 - INSTALLATION AND
COMMISSIONING. Exceptions are activities that can be performed only during operation of the device, in strict
compliance with safety regulations - e.g. electrical measurements or vibration measurements, during which the
engine cover and exposed space for access to the rotor are removed. During the inspection work, safety
regulations must be strictly observed, because non-compliance with them may pose a threat to health and life -
see below - point 10 - OHS MANUAL.
Recycling and cassation
At the time of delivery of the product for cassation, the provisions regarding the cassation of machines
withdrawn from the use and recycling of waste should be observed. No part of the
SMART-SN
fan
construction is classified as hazardous waste.
OHS MANUAL
Commissioning and operation of the device may take place only after reading this manual.
The device is not dangerous, provided it is carefully installed following this manual!
The machine meets the safety requirements of Directive 2006/42/EC and does not require
additional safeguards for safe use!
All inspections and repairs should be carried out only after disconnecting the device from the
power supply. Electrical connection may only be carried out by qualified personnel!
When operating, assembling, electrically connecting, commissioning and service repairs,
comply with safety regulations, standards and generally accepted technical rules!
Due to the presence of sharp edges and corners, during any work such as assembly,
disassembly, repair or inspection, it is necessary to use personal protective equipment as well
as work clothing and footwear!
TRANSPORT AND STORAGE
The device is transported on a pallet and wrapped in foil. Protect the device against damage, slipping, dents
and rain during transport. The device should be stored in a dry and ventilated room. Transport and recharging
should take place in a way that eliminates damage or dents to the device, as well as damage to the packaging or
blurring of markings on it.
Transport the fan with the transport eyes mounted on the engine plate under the engine cover!
Do not use the engine ear!
Storage should be in accordance with the following rules:
A.
The device should be stored in the transport packaging, which protects against external factors.
B.
The place of storage should be dry and free from dust at a temperature of
- 10ºC
to
+ 40ºC
.
TERMS OF WARRANTY
The warranty period is specified in the device
Warranty Card
.
The warranty does not cover:
mechanical and electrical damages of the device caused by the user,
damage resulting from improper use or failure to comply with the operating instructions,
damage resulting from improper transport, storage or improper maintenance.
Non-compliance with point 3 “MANUFACTURER'S DISCLAIMER” of this manual, especially the
unauthorized modification of the device or its improper use will void the warranty!