5
30.01.2019
extraction rail
ERGO-KOS-AL
Fig. No.2
– Installing example of the suction duct – through an intermediate beam to
the roof truss in a high ceiling process hall
Because of the high requirements for the installing of the system
– these works should be exe-
cuted exclusively by an installing team of the manufacturer or under supervision of an authori-
zed person. There are special guidelines in the Assembly Instructions of the KOS-AL suction
duct and in for the extraction arms.
Installing the trolley on the suction duct
:
Slide the OP-ERGO-L trolley into the KOS-AL suction duct
– in such a way that:
–
the trolley rollers are displacing on the side guide-rails of the duct profile,
–
two straps of the rubber apron should hold the suction fitting of the trolley from both sides.
Installing of the ERGO extraction arms:
Extraction trolley is equipped with a flange that is identical with the one at the mounting swivel
of the ERGO LUX and ERGO-FLEX LUX extraction arm. The swivel ought to be fixed through
M6 bolts (6 pieces) to the trolley flange.
NOTE
:
The extraction arms themselves ought to
be assembled according to their manual /
assembly instruction for extraction arms.
Extraction arms are delivered in a partly
assembled state.
Fig. No 3