www.klever-mobility.com
www.klever-mobility.com
24
25
Battery consumption (image 5.22)
The red bars show the actual battery consumption. The more
bars (max 5) the display shows, the more your battery is being
drained. Of course, higher consumption will reduce your
range more rapidly.
Image
5.19
Image
5.20
Image
5.21
Klever’s E-bike drive train
Klever’s E-bike drive train
Display
Capacity
5 bars light up green
≤ 100%
4,5 bars light up green
≤ 90%
4 bars light up green
≤ 80%
3 bars light up green
≤ 60%
2 bars light up green
≤ 40%
1 bar lights up orange
≤ 20%
Half bar lights up red
≤ 10%
Additionally, you can check the charging status with the
LED on the battery too (see section 5.5.1 Charging of the
chargeable battery). To save battery capacity, it is not
possible to choose support level MAX if 10% or less battery
capacity is left. With 5% or less capacity remaining, only the
ECO level of support is available. At 2% remaining battery
capacity the system will switch to level N..
Level of motor support (image 5.19)
The bars in the upper part of the screen show the selected
level of motor support. See section 5.2 for the various levels
of electric motor support and their recommended riding
situations. Section 5.4.3 Submenu ASSIST/REGEN helps to
set the support levels according to your personal riding
preferences.
Speedometer (image 5.20)
The main display in the centre of the screen will show the
actual riding speed.
Regeneration (image 5.21)
The green bars show the actual amount of regenerative power you
get from the system in case you have selected the recuperation =
regeneration mode in the menu. See section 5.4.3 Submenu ASSIST/
REGEN for the menu of regeneration. The more bars (max 4) the
display shows, the more regeneration you get back from the system.
Image
5.22
