TJXTREME
Installation and Operation Manual
PG 32/36
REV: A (5/8/2020)
Figure 22
–
Relay and Fuse location example under hood (1999 Wrangler Sport 4.0L Shown)
10.4.2.
Install supplied fuse holder on end of power wire by cutting the loop in fuse holder and connecting
supplied Ring terminal to one end and Butt connector on other end.
CAUTION:
Do not install 30-amp fuse until all electrical connections are final.
10.5.
Install Horn Button
10.5.1.
Find a suitable location for horn push-
button (i.e., in dash, center console, etc.); verify location has 1”+ of
clearance behind for terminal connectors. Mark location for drilling.
Figure 23
–
Horn Button Installed in Dash (Shown in example vehicle)
NOTE: FOR VEHICLES WITH FACTORY UPFITTER SWITCHES:
FR
ONT
Terminator Horn Button
OE Upfitter Switches
Relay
Fuse