Kleinn Air Horns TJXTREME, Руководство по установке

Страница: 19 / 36

TJXTREME
Installation and Operation Manual
Go to Table of Contents PG 19/36 REV: A (5/8/2020)
8. Bench Assembly
Complete following steps off vehicle to facilitate final installation.
8.1. Assemble Air Fittings to Air Tank
8.1.1. Gather all necessary Air Fittings and Air Tank; ensure all threads on fittings and inside ports are clean.
8.1.2. Apply two small drops of Kleinn Air Horn Juice to each male pipe thread.
8.1.3. Attach Air Fittings to Air Tank, per below illustrations; ensure they are oriented correctly.
Click Here to View Fittings List
Figure 4 – Air Fittings installed on Air Tank (Top Exploded view, as shown resting on bench)
8.1.4. Hand-tighten each fitting, then further tighten 1/4-1/2 turn using proper sized box-end wrench; adjust as
necessary to match fitting orientation, as shown below.
Figure 5 – Air Fittings Orientation (Left & Right view, as shown resting on bench)
FRON
T
DRIVER
To Air Comp.
Approx. 30
deg down
To Air Horn
To Coupler
Level &
Vertical
F2
F3
F5
F7
F6
F3
F1
F4
K2