Kleinn Air Horns CANX3-KIT, Руководство по установке

Страница: 29 / 44

CANX3-KIT
Installation and Operation Manual
Go to Table of Contents PG 29/44 REV: A (9/4/2020)
8.9. Air Compressor Bracket - Installation
8.9.1. Gather X3-101 bench assembled Bracket, from prior step.
8.9.2. On Driver side of vehicle, remove front bolt holding Rack; as shown below. M6 bolt and nut (i.e., front
bolt) will be replaced and may be discarded.
8.9.3. Remove rear bolt holding Rack; same as Figure 6 . Do not discard this bolt; it will be re-used.
Figure 18 – Air Compressor Bracket Mounting Locations (side view w/o fender – CARB Version shown)
Figure 19 – Air Compressor Bracket Mounting Locations (top view)
FRONT
Front Bolt
FRONT
Rack Rear Bolt Rack Front Bolt
EVAP Bracket –
CARB ONLY