Kleinn Air Horns CANX3-KIT, Руководство по установке

Страница: 27 / 44

CANX3-KIT
Installation and Operation Manual
Go to Table of Contents PG 27/44 REV: A (9/4/2020)
8.7.5. Attach Leader Hose Support Bracket (X3-102) on back of Compressor using supplied Hardware H14 , as
shown in above and below figures; also reference Figure 25 below.
8.7.6. Open included* hardware bag (inside Compressor package) and install bolts, lock washers, and flat
washers to Compressor, as shown below; Hex bolts are threaded from front to back. Recommended to
apply Medium-Strength Loctite (i.e., Blue) to threads before installing, then Torque to 20 in-lbs.
Figure 16 - Air Compressor with Bolts and X3-102 (Shown with Air Filter and no Leader Hose)
8.7.7. **Later during on-vehicle assembly, use a razor blade, or scissors to cut supplied Rubber Grommets
(H17) in half and secure Leader Hose to Bracket using zip ties, as shown in above Figure 15.
4X USE NOW (included*)
4X USE LATER
INSTALL FRONT TO BACK
BOLT -> LOCK WASHER ->
FLAT WASHER (4 PLACES)
X3-102
H14 (2)