manualshive.com logo in svg

Klein Marine Systems, Inc. MA-X VIEW 600, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Klein Marine Systems, Inc. MA-X VIEW 600 Скачать руководство пользователя страница 75

Towfish

5-5

Transition board.  

The Transition board provides the means to connect the 

large gauge wires from the RX PORT and RX STBD bulkhead connectors on 
the end cap to the Receiver board’s 50 pin ribbon cable and to the Transmitter 
board’s 3-pin connectors.

+12 VDC Power Supply board. 

The +12 VDC Power Supply board inputs 

100–240 VDC on connector P1 from the Power Filter board’s connector JP1. 
The +12 VDC output from the Power Supply board on P2 is also connected to 
connector JP1 of the Filter board.

24 VDC Power Supply board. 

The +24 VDC Power Supply board inputs 

100–240 VDC on connector P1 from the Power Filter board’s connector JP1. 
The +24 VDC output from the Power Supply board on P2 is also connected to 
connector JP1 of the Filter board.

Power Filter board 12 VDC. 

Voltages are filtered by the Power Filter boards 

to and from the CSI board. The interconnection is from JP2 of the Power Filter 
board to JP18 (12 V) of the CSI board.

Power Filter board 24 VDC. 

Voltages are filtered by the Power Filter boards 

to and from the CSI board. The interconnection is from JP2 of the Power Filter 
board to JP19 (24 V) of the CSI board.

Subsea Telemetry board. 

The Subsea Telemetry board provides the cable 

interface for the towfish. Specifically, the Subsea Telemetry board performs 
the following functions:

• Separates the uplink data signals, the downlink command signals and the 

towfish power.

• Acquires sonar and sensor data from the CSI board and transmits the 

combined data to the SP-III TPU or Rack Mount TPU.

• Receives and interprets command and timing signals from the SP-III TPU 

or Rack Mount TPU.

• Matches the time references at the tow fish and the SP-III TPU or Rack 

Mount TPU.

5.1.2 Transducer Arrays

The transducer arrays contain transducer elements that both transmit and receive 
the acoustic signals. They also include two 2-channel embedded preamplifiers 
each which are powered from the Receiver board. The preamplifiers provide 
filtering and both 12 dB of fixed gain and 48 dB of TVG to the received sonar 
signals where the TVG is triggered from the Receiver board. The 12 dB of fixed 
gain is on or off operator selectable. Along with the TVG to compensate for the 
acoustic spreading loss, the preamplifiers increase the signal-to-noise ratio of the 
received signals before they are output to the Receiver board.

Содержание MA-X VIEW 600

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды