![Klein Marine Systems, Inc. MA-X VIEW 600 Скачать руководство пользователя страница 50](http://html1.mh-extra.com/html/klein-marine-systems-inc/ma-x-view-600/ma-x-view-600_operation-and-maintenance-manual_1977128050.webp)
3-20
CHAPTER 3 Setup and Test
MA-X View 600 Sonar System Operations and Maintenance Manual P/N 11210097, Rev. 00
3.
Verify that the tow cable is connected to the SP-III TPU or Rack Mount TPU
and the towfish.
4.
Turn on the laptop computer or the SonarPro Workstation and wait for the
Windows desktop to appear.
5.
Do one of the following:
• Turn on the SP-III TPU by switching the A/C-D/C switch to A/C for AC
operation or to D/C for DC operation. The PWR indicator should flash, and
the LOCK LOSS indicator should illuminate. After approximately 1
minute, the T/F PWR indicator should turn on. After an additional 15
seconds, the LOCK LOSS indicator should turn off, and the PWR indicator
should stop flashing and remain on.
• Turn on the Rack Mount TPU. The POWER and EQUALIZATION IN
PROCESS indicators should illuminate, and the SYS READY indicator
should flash. Then after approximately 1 minute, the EQUALIZATION IN
PROCESS indicator should turn off, the EQUALIZATION COMPLETE
and T/F POWER indicators should turn on, the SYS READY indicator
should stop flashing and remain on, and the STATUS TRIGGER indicator
should begin flashing at the ping rate of the sonar.
6.
Start SonarPro and connect to the towfish. Acquire data and observe that the
towfish is transmitting by viewing the output pulse in the Sonar Viewer
window. Also check that motion data are being displayed in the Information
window.
7.
If a GPS is connected, check that navigation data are being displayed in the
Information window.
NOTE
For an SP-III TPU, should the DC power cord be connected with
the polarities reversed, the D/C POLARITY indicator will illuminate when
the A/C-D/C switch is switched to D/C. Should this situation occur, reverse
the connection.
CAUTION
Serious damage to the towfish electronics may occur if the
towfish is operated on deck for periods longer than fifteen minutes.
Between periods of operation, let the sonar cool for fifteen minutes. In high
temperature climates, protect the towfish from direct exposure to the sun prior to and
during operation.
Содержание MA-X VIEW 600
