Klein + Hummel K8-AI8, Руководство по эксплуатации

Страница: 11 / 76

K8 Rackmount Family User Manual Page
11
K8-AI8 Technical Specifications
Electrical
Frequency Response
Frequency Response Frequency Response
Frequency Response 20 Hz – 22 kHz
Signal to Noise Ratio Signal to Noise Ratio Signal to Noise Ratio Signal to Noise Ratio
>100dB(A)
Input Input Input Input Balanced analogue audio, XLR-1/4” female combo connector x 8
Input Level Input Level Input Level Input Level +22 dBu peak
-10 dbV to +4 dBu nominal input level adjustments
Output
Output Output
Output Two K8 bus outputs, each drives 200 meters
Control
Control Control
Control RS-485, DB-9 female connector, open published protocol
38400 Baud, 8 Data, 1 Stop, No Parity
Optional USB adaptor
Optional Ethernet adaptor
Termination Switch Termination Switch Termination Switch Termination Switch 4-position DIP
Digital Audio Format Digital Audio Format Digital Audio Format Digital Audio Format 48 kHz sampling rate, 24 bit, proprietary
Latency Latency Latency Latency ½ millisecond worst case, analogue in to analogue out
Power Requirements Power Requirements Power Requirements Power Requirements 100 – 240 Volt, 50-60Hz
15 Watts
IEC power cord connector
Front Panel Indicators Front Panel Indicators Front Panel Indicators Front Panel Indicators Power
Signal present, signal nominal level, signal peak level
Rear Panel Indicators
Rear Panel Indicators Rear Panel Indicators
Rear Panel Indicators OK, Wink
Mechanical
Weight Weight Weight Weight 7 lbs / 3,2kg
Dimensions Dimensions Dimensions Dimensions EIA Standard 19” Rackmount, 1.75” high, 8 “ deep
Operating Temperature Range Operating Temperature Range Operating Temperature Range Operating Temperature Range 0…70°C