Kleenmaid SO4520, Инструкция по использованию и гарантийные обязательства

Страница: 26 / 64

24
" SETTINGS AND CHANGES
!
The temperature can be changed at any time after choosing a cooking function by
simply pressing the right knob.
On the display, the temperature and corresponding icon flash
&
Use the right knob to set the desired temperature and confirm by pressing the right knob.
In any case, after 7 seconds of command inactivity, the temperature chosen is
automatically confirmed (auto-confirm).
The temperature can also be changed using the scrolling functions on the left knob.
Set it on the temperature function: the switch is highlighted by the temperature icon
flashing . To select the desired temperature, press the left knob and the temperature
value starts to flash.
Using the right knob, set the temperature and confirm by pressing it again, otherwise
after 7 seconds the value will be auto-confirmed.
PRESET TEMPERATURE
The preset temperature assigned to each function can be changed.
Use to left knob to go to temperature change mode and select the new preset
temperature. While the display is flashing (and thus within 7 seconds), confirm the value
by holding down the left knob for at least 3 sec. The next time the oven is turned on the
new preset temperature will be active.
" OVEN PRE-HEATING
Once the cooking function and temperature has been chosen, the 3 START key
! !
enters cooking mode and the oven starts the pre-heating phase.
The rising temperature icon starts to flash and the status graph
!
shows the
temperature reached inside the oven. Once all the bars on the graph are full, a long
audible signal indicates that the set temperature has been reached inside the oven and the
rising temperature icon no longer flashes.
The stabilised temperature icon appears in its place .
At this point the oven maintains the set temperature inside the cavity.
If oven temperature changes are made, the
rising temperature and falling
temperature icons are activated.