Kleenmaid FEG 600 X, Инструкция по использованию и гарантийные обязательства

Страница: 19 / 32

Advice for use and maintenance of catalytic panels.
The catalytic panels are covered with special microporous enamel which absorbs and does
away with oil and fat splashes during normal baking over 200°C.
If, after cooking very fatty foods, the panels remain dirty, operate the oven “idling” on max
temperature for about 30 minutes.
These panels do not need to be cleaned, however it is advised to periodically remove them
from the oven (at least the side panels) and to wash them with tepid soapy water and then
wipe off with a soft cloth.
Do not wash or clean with abrasive products or with products containing acids or
alkalis.
The side panels are reversible and when the catalytic microporous enamel degrades, they
can be turned to the other side.
GRILL HEATING ELEMENT
[
The heating element is self-cleaning and does not require maintenance.
GREASE FILTER
[
Clean the filter after any cooking! The grease filter can be removed for cleaning and
should be washed regularly in hot soapy water (fig. 10).
[
Always dry the filter properly before fitting it back into the oven.
REPLACING THE OVEN LIGHT
Before any maintenance is started involving electrical parts of the appliance, it must
be disconnected from the power supply.
The bulb must be a type resistant to high temperatures (300°C).
19
Fig. 13 Fig. 14