KLC Disco 240, Руководство пользователя

Страница: 10 / 14

9
whether to randomly read the state data corresponding to
the potentiometer or to read the state data the program
has already set. Press the [RELEASE] key once again, to
store the set state and quit.
(O indicates the CH1-CH16 channel data is controlled
by the manual slider, and F indicates that the channel
data automatically runs with the program.)
[MANUAL]
When running the chase, press [MANUAL], and then press
any key of (P1-P12), to select the scanner number to be in
the manual state, and then slide the released channel, and
then the dimmer effect can be controlled both manually and
automatically.
10. Explanation of the display information on the LCD
Display Specific information
DISCO 240 V3.0A
Company name, model and version number
S/N:0020-02-2727****
TEST OK
Sequence Number and test condition
RUN Chase [??]
[01] [00.0] [00.0]
Press [EDIT/RUN], the corresponding indicating light will be off,
indicating the console is in the running standby.
The ?? in Chase [??] indicates the chase number to be input, [01]
[00.0] [00.0] are respectively the chase step numbers, the chase pause
time, and chase cross speed.
RUN Chase [??]
CH[**] [***] or
X [***] Y [***]
The upper line indicates the running chase, and bottom line indicates
the modified channel number and channel data.
RUN SCENE
SELECT P1
—
P12
Press the number key of P1-P12 to select the first 12 scenes that
represent the No.1 chase.
EDIT Chase [??]
CH [01] [**]
Press [EDIT/RUN], to have the corresponding indicating light on,
indicating the console is in the edit state.
The ?? in Chase [??] indicates the chase step, which can change with
the operation of
［ －］
or
［＋ ］
When the final [ ] shows **
in it, it indicates that chase step is the last step in this chase.
When [ ] is empty, it indicates that there have been already chase
data.
EDIT Chase [??]
CH[**] [***]
or X [***]Y [***]
The upper line represents the chase number to be edited, and the
bottom line rpresents the modified channel number and the channel
value.
EDIT Chase [??]
SPEED [***]
The upper line represents the chase number to be edited, and the
chase pause time or chase cross time.