KLAUS Multiparking trendvario6X00, Руководство по обслуживанию

Страница: 65 / 72

Page 65 of 72
Transmitter

6 buttons

Infrared transmission

Radio transmission

System parameters (address-/ channel assignment, type of transmission technology, etc.) can be
programmed for each key (Channel) via IR-USB adapter from a PC / laptop

Battery-type CR2032 (quickly replaceable by removeable battery sled)

Battery life > 1,5 years (depending on application)

Compatible with the Control Unit Simply (MCU) Version KLAUS Multiparking and matching IR and RF
sensors of the IFFS series.

When replacing a remote control, it must be re-taught at the radio receiver. The new address of the
remote control is stored on the MCU. If several radio receivers are connected to the MCU, the remote
control can be taught in at any receiver.
Information
Hand transmitters only have to be taught in at radio!
There are different handheld transmitters with corresponding frequency for the European (868 MHz)
and the American (922 MHz) market.
Infrared receiver
The infrared sensor (SN-IR-CB-CAN) is compatible with IFFS series systems. Connected to a Control Unit (MCU),
the sensor receives carrier-based infrared telegrams from the transmitters in the series, evaluates the telegrams
and sends the control data to the Control Unit. The IR sensor provides ambient light dependent gain, i.e. the range
depends on the ambient brightness. The length of the connecting cable is approx. 80 cm.
Replacing an infrared receiver does not require reconfiguration between the transmitter, receiver and MCU since all
the handheld transmitter addresses are stored on the MCU.