Klarstein 10040269, Руководство пользователя

Страница: 61 / 68

61
EN
Problem Potential cause Prevention / Solution
The burner will not
light with the igniter.
Electrical problems:
The electrode is
cracked or broken;
"spark at crack"
Replace electrode.
The electrode tip is not
in the correct position.
The tip of the electrode
should point towards the
opening in the burner. The
distance should be 1/8
to 3/16 inches. Adjust if
necessary.
Wire and/or electrode
are covered with
cooking residue.
Clean the wire and/or
electrode with rubbing
alcohol and a clean swab.
The wires are loose or
not connected.
Reconnect the wires or
replace the electrode/wire
assembly.
The wires have a short
circuit (spark) between
the igniter and the
electrode.
Replace the fuse wire.
The push button
clamps to the
underside and sparks
between the igniter
and the electrode.
Replace the igniter.
The insulation of
the wires could be
damaged.
Check the insulation of
the wires and the proper
connection. Replace wires
when insulation is broken.
The burner cannot be
lit with a match.
See "Gas problems" (on
the previous page)
See: Instructions for
lighting the barbecue in the
"Operation" section of this
manual.
Lighting with a match
is the wrong method of
ignition.