26
EN
DEVICE OVERVIEW
1
Lampshade
4
Storage space for the stand
2
On/Off button
5
Mains connection
3
Hole for the stand
6
Stand
COMMISSIONING AND OPERATION
Before operation
1. Remove the stand from the storage compartment.
2. Insert one end of the stand into the hole on the back of the unit.
3.
Place the unit on a flat surface about 20 cm from your eyes. The light should
hit the side of your face slightly.
4.
Plug the device into a 220-240 V outlet. Insert the plug firmly into the outlet
and use an outlet that is close to the installation site. Route the cord so that no
one will trip over it.
