11
After the „ON‘‘ button of the switch is pressed, the appliance
will begin to run. Interval ≤ 10 minutes. Do not touch the
power switch with wet hands, otherwise an electric shock or
leakage accident or a fire accident may happen.
12
Put food ingredients into the inlet port on the juicing body
and then push the food ingredients with the food pusher.
Do not push the food ingredients violently but with a proper
force enough to cut off the food ingredients. (Never put fin
-
gers or other objects into the inlet port on the juicing body.
After the pulp container or the juice cup is full, disconnect
the power supply and remove the pulp or pour the juice
before continuing to use the appliance).
After food ingredient processing is finished and there is no more juice flowing out from the juice
outlet, switch off the power switch and disconnect the power supply. Do not take the juice cup away
from the juice outlet until both the juicing screw and the juice strainer have completely stopped. (The
extracted juice should be drunk at once. If it is exposed in air for some time, its flavor and nutrition
will be both affected.) Do not store pulp for a long time.
Cleaning and Care
•
Before cleaning the appliance, DO switch off and disconnect the power supply.
• After use, clean the appliance promptly.
• Do not wash the main body with water but wipe the stains on with a cotton cloth.
• Before storing the appliance, make sure it is clean and dry.
• Following the below steps to clean the appliance after dismantling it:
1
Take down the food pusher and the hopper.
2
Press the lock on the upper-side of the juicing body and
turn the juicing body clockwise at the same time to take out
the juicing body. (The juicing body cannot be dismantled if
the lock is not pressed.)
12
