27
Problem
Cause
Remedy
The beer flows too
slowly out of the
dispensing tap.
The CO2 cartridge is empty.
Inserting a new CO2 cartridge into the
dispenser.
There is too little CO2 in the beer keg.
Turn the CO2 regulator (5) towards I or II.
The dispensing tap handle was not
opened completely.
Completely open the dispensing
tap handle.
The cooling chamber
is covered with frost.
The surrounding environment is too
humid.
Place the dispenser in a drier environment.
The surrounding temperature is too low. Place the dispenser in a warmer environ-
ment.
The dispenser lid does
not close.
The dispensing unit (3) is not correctly
mounted onto the beer keg.
Correctly mount the dispensing
unit (3).
It is very difficult to push
the connecting tube (26)
into the beer keg.
The connecting tube (26) is too dry.
Wet the connecting tube (26) with cold
water.
Hints on Disposal
According to the European waste regulation 2002/96/EC this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailed information about recycling of this product, please contact your local council or your
household waste disposal service.
Declaration of Conformity
Producer:
Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
Содержание 10010176
Страница 1: ...10010176 Bierzapfanlage...
