Klarstein 10009785 Скачать руководство пользователя страница 16

Tips:

Code check is required before you use the remote control, or it will fail to work.

Steps for code check: Please ensure the power of the remote control & cleaner are enough, and then 

according to the following steps.

  A: Turn off the cleaner;

  B: Press and hold the “OK” button on the remote control;

  C: Turn on the machine

  D: After the cleaner toot twice or 3 times,release the “OK” button, then the code check set is 

 

       finished successfully.

Note: 

If you fail to hear toot twice or 3 times,during the code check,just repeat the above process.

Functions Introduction of Remote Control:

• 

SPEED selection:

 

  press “SPEED” button on the remote control, you canchoose fast or slow speed.

 

 fast speed                 

 slow speed

  TIME (Current Time Setting)

  Press “TIME” button first and then press 

 

 buttons, you can see a shining spot on the screen 

 

  of the remote control switching among hour, minute & weekday (as shown on Pic 1)

   Press   

  buttons  to  change  the  parameter  and  set  the  hour, 

 

  minute&weekday respectively.

 

Tip: 

During the setting, press button   to quit; press “TIME” button to save 

the current setting.

 

• 

SET (pre-set cleaning):

  A: Pre-set time

    Press “SET” button first and then press 

 

 buttons, the shining spot on the screen of the 

 

    remote control will switch among hour, minute & weekday (as shown on Pic 2)

  Press  

 buttons to change the parameter to a idea time that 

 

    you want the machine work.

   B: Pre-set weekday:

    During pre-setting, when the shining happens to

 

 

press 

 

    „OK“ button; the presently shining spot will have a “beam” shining 

 

    or extinguished; the weekday with the “beam”

 

 shining is  

    the present pre-setting.

    Press „ALL“ button to switch between selection of all 

 or no selection of all 

 

Tip: 

During the setting, press the   button to quit; press the “SET” button to save the present setting.

• 

FULL GO FUNCTION

  1.  Press the “SET” button, the screen shows a shinning spot

 

, then press the “STOP” button, 

 

    you can see “

”displaying with the first F flashing, press again the “SET” to stop flashing which 

 

    indicates FULL GO function is activated, so the machine can automatically clean when has been 

 

    fully charged.

 

16

Содержание 10009785






















Отзывы: