Klarstein 10009785 Скачать руководство пользователя страница 13

1. Take out battery in case of no more use of the machine.

2. Power off first, before taking out the battery of the machine.

3. Don’t put the battery at any enviroment over 45° C or inside water.

4. Don’t apply external load to the battery or fall them from height.

5. The battery must be recycled for safe treatment. No free disposal away or into fire 

 

    is allowed, otherwise there may be explosion.

6. In case of leakage, don’t let the liquid exposed to skin or clothes but immediately 

 

    wipe with dry clothes and then send to recycling station or appointed maintenance 

 

    outlet, rather than free disposal.

7. No chargeable battery that from different suppliers is allowed for the machine.

8. To extend battery life, make sure charging the battery 12 hours at first use of the 

 

    robot or if it is long time not in use, otherwise its working time would dramatically 

 

    lower down, far less than its normal working time. 

Battery replacement of the Space lsolator

1.  Open the cover as per figure 1.

2.  Please the batteries (not inclued with correct 

 

  polarity (+/-) (Refer to Figure 2/3)

3.  Please take out the battery if it was unused 

 

  for long.

Battery replacement of the remote control

1.  Open the battery cover and then replace the 

 

  battery. (Refer to Figure 1)

2.  Please place the positive and negative poles 

 

  correctly  for  fear  of  the  damage  due  to 

 

  wrong poles! (Refer to Figure 2)

3.  Please take out the battery if it was unused 

 

  for long.

1. Please don’t place the battery in the high-temperature environment above 45° C or 

 

    in the water.

2. Please don’t exert external force to the battery or drop them from high place.

3. The battery should be recycled with safe disposal. Please don’t discard it freely or 

 

    throw it into fire for fear of explosion! 

13

Содержание 10009785






















Отзывы: