Introduction
Structure Introduction
Battery Replacement & Installment
1. Release the screw with a screwdriver,
open its base plate. (Refer to Figure 1)
2. Connect two terminals during bat-
tery installation. (Refer to Figure 2)
3. Place the positive and negative
poles correctly for fear of the damage
due to wrong poles.
4. Set the cleaner in charging status
to keep the best performance of the
battery while the cleaner is not in use.
5. Ensure using the original battery
of the manufacturer for replace-
ment, otherwise there may be da-
mage or accident.
AUTO/automatic cleaning
Power indicator
SPOT/spot cleaning
Handle
CHARGE / charge
Top cover
signal receiver
Auto-charging electrodes
Wall datection sensors
Floor brush
Right wheel
Dust box
Main brush
Power switch
DC socket
Ground detection sensor
Side brush
Front wheel
Left wheel
Ground detection sensor
Battery cover
12
