Klaro 970716, Руководство по эксплуатации

Страница: 7 / 24

Operating Instructions KLAROconnect
Status 06/2022 KLARO GmbH Page 6/21
3.2 Scope of delivery
970716Additional package KLAROconnect indoor antenna I-cabinet PP, A-cabinet PP
970717Additional package KLAROconnect indoor antennaI-cabinet1/2/3, A-cabinet4/5, M-technology
970718Additional package KLAROconnect indoor antenna A-Uni. / -pillar
970719Additional package KLAROconnect external aerialA-cabinet3/4/5/uni / column
Article Quantity Designation 970716 970717 970718 970719
901471 1 STK KLAROconnect ● ● ● ●
982223 1 STK Data cable ● ● ● ●
901474 1 STK LTE indoor antenna ● ● ● ●
901476 1 STK LTE outdoor antenna ○ ○ ○ ●
980194 10 CM Velcro tape ● ● ● ●
901475 1 STK Ethernet extension cable ● ○ ○ ○
980314 1 STK Cable gland M16 ○ ● ○ ●
980311 1 STK Locknut M16 ○ ● ○ ●
● Included in the scope of delivery
○ not included in the scope of delivery
The following is a pictorial representation of components from the KLARO WebMonitor® packages
(Velcro tape, cable gland and locknut are not shown).
Illustration 1 901474 LTE indoor antenna with tilt joint (always
included as standard)
Picture 2 901476 LTE outdoor antenna SMA 4G
Illustration 3 901475 Ethernet extension cable FTP Cat6 right-
angled 0.5m (as standard for I-cabinet PP)
Illustration 4 982223 Data cable KLAROconnect
KLAROcontrol.S/M
Operating Instructions KLAROconnect
Status 06/2022 KLARO GmbH Page 7/21
3.3 Mounting KLAROconnect
3.3.1 Velcro fastening
The Velcro tape included with the KLAROconnect is used
to mount the communication module.
Note: The glued areas must be made dust-free before
applying the Velcro tape.
3.3.2 Mounting adapter (available from WAGO)
The KLAROconnect can be mounted on a DIN 35 rail using two mounting feet (WAGO 209-123). To
do this, the mounting feet are mounted with the screws on the underside in the holes provided.