1
Thank You For Using This Klark Teknik Product
Precautions
Voltage Selection and Power Connection
Safety Warning
Attention!
Do not install this unit in a location subjected to excessive heat, dust or mechanical vibration.
Connection is made by means of an IEC standard power socket. Refer to the Technical Spec for the
voltage range required for satisfactory operation of the unit.
Before connecting this unit to the mains supply, ensure the fuse fitted is the correct type and rating
as indicated in the Technical Spec..
This unit is fitted with a standard fused IEC mains inlet: For safety reasons the earth lead should
never be disconnected.
To prevent shock or fire hazard, do not expose the unit to rain or moisture. To avoid electrical shock
do not remove covers. Refer servicing to qualified personnel only.
To obtain maximum performance from this precision electronic product, please study these instructions
carefully. Installation and operating the DN9824 is not complicated, but the flexibility provided by its
operating features merits familiarisation with its controls and connections. This unit has been prepared
to comply with the power supply requirements that exist in your location.
Cables:
Electric Fields:
This product should only be used with high quality, screened twisted pair audio cables, terminated
with metal bodied 3-pin XLR connectors. Any other cable type or configuration for the audio
signals may result in degraded performance due to electromagnetic interference.
Should this product be used in an electromagnetic field that is amplitude modulated by an audio
frequency signal (20Hz to 20kHz), the signal to noise ratio may be degraded. Degradation of up to
60dB at a frequency corresponding to the modulation signal may be experienced under extreme
conditions (3V/m, 90% modulation).
