42
Installation
Building-in dimensions
45
20mm
595
595
(731)
Compact appliances H:454mm
Big Oven H:595mm
Safety instruction for installation
• Before conneting the appliance to the mains electrici-
ty supply make sure that the connection data on the
data plate (voltage and frequency) correspond with the
mains electricity supply, otherwise the appliance could
be damaged. Consult a qualified electrician if in any
doubt.
• The socket and on-off switch shoudl be easily acces-
sible after the appliance has been built in.
• The warming drawer may only be built in in combinati-
on with those appliances quoted by the manufacturer
as being suitable. The manufacturer cannot guarantee
trouble-free operation if the appliance is operated in
combination with appliances other than those quoted
by the manufacturer as being suitable.
• When building in the warming drawer in combination
with another suitable appliance, the warming drawer
must be fitted above a fixed interim shelf in the housing
unit. Please ensure that the housing unit can support
both its weight and that of the other appliances.
• As the combination appliance is placed directly on top
of the warming drawer once it is built in, an interim
shelf is not necessary betweem tje two appliances.
• The appliance must e built in so that hte contents of the
dawer can be seen. This is to avoid scalding from hot
food spilling over. There must be enough space for the
drawer to be pulled out fully.
• The muilding-in dimensions for the warming drawer
must be added to the building-in dimensions for the
combination appliance to establish the niche size
required.
• When building in the combination appliance, it is essen-
tial to follow the instructions given in the operating and
installation instructions supplied with the combination
appliance.
All dimensions in this instruction booklet are given in mm.
!
Installation