36
Using your induction hob
If the display flashes alternately with
the heat setting - This means that:
• You have not placed a pan on the correct cooking
zone or,
• the pan you’re using is not suitable for induction
cooking or,
• the pan is too small or not properly centred on the
cooking zone.
No heating takes place unless there is a suitable pan on
the cooking zone. The display will automatically turn off
after 1 minute if no suitable pan is placed on it.
3.
Touching the heating zone selection control,
and a indicator next to the key will flash.
4.
Adjust the heat setting by moving your finger over
the slider control or tap the desired intensity level
directly on the slider bar.
• If you don’t choose a heat setting within 1 minute,
the ceramic hob will automatically switch off.
You will need to start again at step 1.
• You can modify the heat setting at any time during
cooking.
• You can modify the power level from 0 to 9 by the
slider control.
Power up
Power down
Tap directly
