46
Connecting the hob to the main power supply
16. Connecting the hob to the mains power supply
The power supply should be connected in compliance with the rele-
vant standard, or a single-pole circuit breaker.
The method of connection is shown below.
• If the cable is damaged or needs replacing, this should be done by
an after-sales technician using the proper tools, so as to avoid any
accidents.
• The installer must ensure that the correct electrical connection
has been made and that it complies with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and only replaced by a pro-
perly qualified person.
• The installer must to use the H05GG-F power cord.
