46
Connecting the hob to the main power supply
16. Connecting the hob to the mains power supply
The power supply should be connected in compliance with the rele-
vant standard, or a single-pole circuit breaker.
The method of connection is shown below.
• If the cable is damaged or needs replacing, this should be done by
an after-sales technician using the proper tools, so as to avoid any
accidents.
• If the appliance is being connected directly to the mains supply,
an omnipolar circuit breaker must be installed with a minimum
gap of 3mm between the contacts.
• The installer must ensure that the correct electrical connection
has been made and that it complies with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and only replaced by a pro-
perly qualified person.
• The installer must use the H05GG-F power cord.
Device is not suitable for
operation with an EU plug!
1 x 220-240V~
32A
2
x
230V 2N~
16A
Note:
Hob blue and grey connect
in box on blue clamp.
Black on L1, brown on L2.
blue and grey do not disconnect!
If you are not sure,
please contact customer service.
