1, Receiver
2, Power cable
3, Antenna of receiver
4, 4 "AA" rechargeable battery of receiver
5, Charge of receier
6, Transmitter
7, Power cable of transmitter
8, Antenna of transmitter(in separate package, pls ask your
retailer for details)
9, Sonar senser(transducer)
10, Magnet for mounting transducer
11, Tripod(optional)
3 Assembling the transmitter
3.3 Plug the transducer cable connector into the transmitter (see
illustration)
Note: Tightening the screws.
2.2 Method II: Stick the magnet on the bottom of boat by glue (see
illustration), make the the magnet on the transducer magnetize with the
one on the boat.
2.1Method I:Remove the cover under the bait boat, put the transducer
into the hole and keep the bottom of transducer to face outside (see
illustration), fixing it by the screws.
2.3 Fixing the transducer signal cable on the tail of the bait boat(see
illustration)
2 Mounting the transducer
3.1 Assembling the transmitter on the top of the bait boat (see
illustration).
-14-
-15-
Note: Make sure the magnet is kept to be horizontal with bottom of
boat when it is fixed.
3.2 Assembling the antenna on the transmitter (see illustration).
Fixing
Magnet
Fixing
Screw tightly
Plug into
Magnetize
Remove
Fixing
