Plug the power cable connector into the socket on the back of the display
tightly and another side to the battery compartment.
5.3 Connecting the Power Cable
5.2 ASSEMBLING THE ANTENNA
When you first use the Fish Finder you will need to installing the batteries.
Slide the Battery Door, and insert 4 "AA" batteries to the battery
compartment.
Be certain to align the batteries as per the diagram within the battery
compartment.
Plug the antenna into the socket on the back of display tightly(see
illustration)
-7-
Screw the tripod in the screw thread socket on the bottom of battery
compartment tightly(see illustration)
Plug one side of charger's cable connector into the DC socket of receiver,
another side into the AC power, the red indicator light and charging is
started. The indicator turns green when power is full.
Warning!!! The chargers are different for transmitter and receiver.
Correct using must be requested according to the instruction on
the charger and this guide, otherwise the damage will be caused!
5 Assembling the receiver
-6-
5.4 Assembling the tripod(tripod is optional)
6 Charge the battery of receiver
5.1 INSTALLING THE BATTERIES
Screw tightly
Plug into
Plug into
